Posts Tagged ‘frames’

Flexible BaseboardsThe different types of decorative frames

A decorative molding can be defined as any continuous projection to improve the appearance of a wall. In ancient Greece, for the first time used to extract water from the wall. The contours, sizes and projections vary widely moldings.

Frieze
A type of molding – the frieze (or frieze board) – was the first time in the Parthenon on the Acropolis. The frieze is considered part of the Church greek-style architecture.

The Parthenon was built for the goddessAthena. The frieze moldings used were intended to tell the story of her victory over Poseidon to be the patron of the ancient city is located in Athens.

Frieze panels designed a series of gables are filled with images of the birth of Athena and the birth. Today, the frieze is a flat plate just below a cornice or crown molding. Often, the relief applies to panels for decoration added.

Today, the frieze moldings are the most common, as part ofa decorative molding that follows the neo-classical furniture.

You need a roof high enough (at least 9 meters), and is a good idea to paint or stain the frieze and cornice of the same color. The frieze is a good way to visually lower the ceiling and the room feel more comfortable.

Crown molding
Crown molding is the most famous of cornice moldings. Crown molding is usually a single piece of decorative molding, installed on top of athe wall in a corner of the roof next door. However, I have been riding cutting 5 or more rooms in more elaborate structures.

Crown molding is often a profile that is projected from the ceiling and the wall, adding a rich look of a room. Often used in high cabinets or fixtures.

The introduction of this type of decorative molding a relatively simple piece, offers a historical figure that the room would not have been otherwise. Crown molding is alsoused in combination with other finishes to add details to fireplace mantels and shelves. (For what it's worth, this is probably my favorite feature of the architecture).

Crown molding is a molding of the Corniche. The term "projection" describes molding installed on top of a wall or window. When this treatment is a multi-part molding, which is called "build-ledge." The other way to Cove cornice molding molding.

Cove molding

Cove Moldingvery similar to the frames with the same application and function. The difference between the two is in the profile. Cove molding has a concave profile (which bends inward), and has a convex molding (out) profile.

While the crown is more comfortable in a traditional, Cove moldings are just as good in the country, or even the current configuration. What is not normal, multi-room meetings Cove moldings. Sometimes you can see "pearls" at the top and bottom for a while 'accent.

Tickets, boardrooms, formal dining rooms and bedrooms are usually decorated with moldings or traditional.

Kitchens and other areas of the home could be more functional one in which the simpler design of the molding bay. Over the years, the caves and the crowns have become much smaller, but most are still forms and styles of the original creators of Greece and Rome.

Chair Rail Moulding

A guide chair is a decorative moldingdividing the wall horizontally, usually about 32 "to 36" above the ground. To protect the walls in areas where damage can happen to people on a chair.

For this reason, traditional picture rails have a nose in the middle, curved and beveled at an angle against the wall above and below the nose.

At present, the leadership chair is a common detail in traditional interiors. They serve the decorative effect of unifying the various architecturaldetails of a room, such as windows, doors and moldings and fireplace surrounds.

Chair rail can also be used as a limit for wood panels or other. This decorative molding adds a sense of detail and charm, while achieving the continuity of a room by unifying the various decorative elements.

Panel molding
Molding of the panel, commonly known as a molding frame, frame looks like a great void, and is often part of the drawings on the walls of the ancient and colonial Georgia and principleshomes. The molding should be positioned above the chair rail height and 10 to 12 cm from the ceiling.

The size of this type of crown molding, 1 "to 3" wide, should be proportional to the height of the ceiling of the room. Like other fungi, panel molding adds a sense of charm and delicate details of a room.

The framework for the wall is Georgia of American architecture, when the cast began to replace the panels on the walls. PanelThe casting is also a good way to partition large drives in the beauty, the same cost of solid wall panels.

Another application of this versatile molding to cut the openings made by the boards wider than has been collected, such as rails and styles. Often, the centers of these plots are left open. Applying the trim panel around the perimeter of the opening, you must create the appearance of an image.

When the decorative molding is painted the same colorboundary walls, to get a sculptural quality of a wall, add textures and shadows. If the moldings are painted in contrasting colors, which can create a striking three-dimensional effect, giving depth and dimension. This treatment is very popular for stairways and entrances.

The base plate and base molding

The baseboard molding protects the base of the wall of ceramic and tears, hiding the holes and irregularities in the wall with the floor. Base molding to the wordLine a higher profile, and can be simple or elaborate as you want.

While it is relatively easy to install chair rail on one level, taken (like the crown) can be complicated if the floor (or ceiling) are not the same level. For this reason, I suggest you get a professional carpenter to install these profiles.

As a remedy for uneven floors, install a "shoe molding" along the bottom edge of the motherboard before giving a more finished look. Another thing you can do withsockets (as well as the base of your kitchen cabinets) is the addition of accent lighting.

He does not agree with the traditionalists pure, but it is nice to have the accent lighting around the perimeter of a room. You could not do it until you have created small lights led rope today.

Rope lights come in different sizes and colors and can be easily installed behind the skirting board. Only makes an incision in the back of the socket at the top and backRope lights in the slot.

This is the most widely used in commercial spaces, but has been added to entrances and corridors – especially in contemporary homes.

Flexible temples
If you have a curve or arc on the wall, you can probably have a good craftsman to create a curve to cut about 3 times the cost of a molding line. Or you can buy a flexible cast of about the same price as straight.

They allow you to install molding on curved surfaces or edges, nothe delay and expense of having made of wood. Profiles of action (hundreds) are identical to the versions they are compatible and rigid in terms of painting.

Flexible Baseboards

Flexible BaseboardsThe different types of decorative frames

A decorative molding can be defined as any continuous projection to improve the appearance of a wall. In ancient Greece, for the first time used to extract water from the wall. The contours, sizes and projections vary widely moldings.

Frieze
A type of molding – the frieze (or frieze board) – was the first time in the Parthenon on the Acropolis. The frieze is considered part of the Church greek-style architecture.

The Parthenon was built for the goddessAthena. The frieze moldings used were intended to tell the story of her victory over Poseidon to be the patron of the ancient city is located in Athens.

Frieze panels designed a series of gables are filled with images of the birth of Athena and the birth. Today, the frieze is a flat plate just below a cornice or crown molding. Often, the relief applies to panels for decoration added.

Today, the frieze moldings are the most common, as part ofa decorative molding that follows the neo-classical furniture.

You need a roof high enough (at least 9 meters), and is a good idea to paint or stain the frieze and cornice of the same color. The frieze is a good way to visually lower the ceiling and the room feel more comfortable.

Crown molding
Crown molding is the most famous of cornice moldings. Crown molding is usually a single piece of decorative molding, installed on top of athe wall in a corner of the roof next door. However, I have been riding cutting 5 or more rooms in more elaborate structures.

Crown molding is often a profile that is projected from the ceiling and the wall, adding a rich look of a room. Often used on top of cabinets or fixtures.

The introduction of this type of decorative molding a relatively simple piece, offers a historical figure that the room would not have been otherwise. Crown molding is alsoused in combination with other finishes to add details to fireplace mantels and shelves. (For what it's worth, this is probably my favorite feature of the architecture).

Crown molding is a molding of the Corniche. The term "projection" describes molding installed on top of a wall or window. When this treatment is a multi-part molding, which is called "build-ledge." The other way to Cove cornice molding molding.

Cove molding

Cove Moldingvery similar to the frames with the same application and function. The difference between the two is in the profile. Cove molding has a concave profile (which bends inward), and has a convex molding (out) profile.

While the crown is more comfortable in a traditional, Cove moldings are just as good in the country, or even the current configuration. What is not normal, multi-room meetings Cove moldings. Sometimes you can see "pearls" at the top and bottom for a while 'accent.

Tickets, boardrooms, formal dining rooms and bedrooms are usually decorated with moldings or traditional.

Kitchens and other areas of the home could be more functional one in which the simpler design of the molding bay. Over the years, the caves and the crowns have become much smaller, but most are still forms and styles of the original creators of Greece and Rome.

Chair Rail Moulding

A guide chair is a decorative moldingdividing the wall horizontally, usually about 32 "to 36" above the ground. To protect the walls in areas where damage can happen to people on a chair.

For this reason, traditional picture rails have a nose in the middle, curved and beveled at an angle against the wall above and below the nose.

At present, the leadership chair is a common detail in traditional interiors. They serve the decorative effect of unifying the various architecturaldetails of a room, such as windows, doors and moldings and fireplace surrounds.

Chair rail can also be used as a limit for wood panels or other. This decorative molding adds a sense of detail and charm, while achieving the continuity of a room by unifying the various decorative elements.

Panel molding
Molding of the panel, commonly known as a molding frame, frame looks like a great void, and is often part of the drawings on the walls of the ancient and colonial Georgia and principleshomes. The molding should be positioned above the chair rail height and 10 to 12 cm from the ceiling.

The size of this type of crown molding, 1 "to 3" wide, should be proportional to the height of the ceiling of the room. Like other fungi, panel molding adds a sense of charm and delicate details of a room.

The framework for the wall is Georgia of American architecture, when the cast began to replace the panels on the walls. PanelThe casting is also a good way to partition large drives in the beauty, the same cost of solid wall panels.

Another application of this versatile molding to cut the openings made by the boards wider than has been collected, such as rails and styles. Often, the centers of these plots are left open. Applying the trim panel around the perimeter of the opening, you must create the appearance of an image.

When the decorative molding is painted the same colorboundary walls, to get a sculptural quality of a wall, add textures and shadows. If the moldings are painted in contrasting colors, which can create a striking three-dimensional effect, giving depth and dimension. This treatment is very popular for stairways and entrances.

The base plate and base molding

The baseboard molding protects the base of the wall of ceramic and tears, hiding the holes and irregularities in the wall with the floor. Base molding to the wordLine a higher profile, and can be simple or elaborate as you want.

While it is relatively easy to install chair rail on one level, taken (like the crown) can be complicated if the floor (or ceiling) are not the same level. For this reason, I suggest you get a professional carpenter to install these profiles.

As a remedy for uneven floors, install a "shoe molding" along the bottom edge of the motherboard before giving a more finished look. Another thing you can do withsockets (as well as the base of your kitchen cabinets) is the addition of accent lighting.

He does not agree with the traditionalists pure, but it is nice to have the accent lighting around the perimeter of a room. You could not do it until you have created small lights led rope today.

Rope lights come in different sizes and colors and can be easily installed behind the skirting board. Only makes an incision in the back of the socket at the top and backRope lights in the slot.

This is the most widely used in commercial spaces, but has been added to entrances and corridors – especially in contemporary homes.

Flexible temples
If you have a curve or arc on the wall, you can probably have a good craftsman to create a curve to cut about 3 times the cost of a molding line. Or you can buy a flexible cast of about the same price as straight.

They allow you to install molding on curved surfaces or edges, nothe delay and expense of having made of wood. Profiles of action (hundreds) are identical to the versions they are compatible and rigid in terms of painting.

Flexible Baseboards