Posts Tagged ‘introduction’

Flexible BaseboardsAn Introduction to Decorative Molding in Your Home

Decorative molding includes all of the kinds of trim used in a home. It can serve a purely decorative function, or it can also be used to hide any unfinished edges of a wall. Moldings can be made of wood-most usually of pine or oak-or, as is used frequently today, polyurethane. Polyurethane is a lightweight, long-lasting, durable alternative to wood. Molding can also be painted or stained.

This article provides a brief description of the types of decorative trim available as well as information available to guide you in your use of decorative molding in your home.

5 types of molding

There are five types of decorative molding commonly used. These include: baseboard, cornice, crown, wall moldings, and panel moldings. Let’s take a look at each one separately.

Base. Base molding is the trim used to finish the wall along the floor. Also called a mopboard, the baseboard protects the wall. Ideally, your baseboard complements the casings around your doors and windows. A baseboard is commonly found throughout every room in most homes.

Cornice. The cornice is the decorative molding placed along the top of the wall. Cornice can be built up using many pieces of trim. Cornice is a more ornate version of crown molding. Ornamentation includes acanthus leaf, egg and dart, modillions, or dentil among many others.

Crown. Crown molding is also used along the top of the wall. Also called bed moldings, they are installed at an angle to adjunct surfaces. Crown molding is also used to finish cabinets, built-ins, and fireplaces. Cove molding, a rounded piece of trim at the juncture of the wall with the ceiling, provides yet another means of transition from the wall to the ceiling.

Both crown and cornice moldings have been around as long as the use of plastered ceilings has been. Cornice and crown moldings usually reflected the type or intended use of the room. For example, reception rooms were often decorated with more ornate cornice moldings, while plainer crown molding was often installed in the more functional areas of the home, such as the kitchen.

Wall moldings. This group includes the chair rails, and the less common picture rails and friezes. Chair rails are popular features and so can be found throughout many homes. It is the molding that sits approximately 30″-36″ above the floor, right at about the height of a chairback. If you choose to panel the wall below, this trim is known as a dado cap.

Picture rails and friezes are often confused, while in actuality they are two separate entities, although the difference is slight. A picture rail has a rounded top edge protruding out from the wall, where hooks are often placed. Its main purpose is for hanging pictures. A frieze, on the other hand, is a flat molding, frequently decorated with relief carving or classical profile.

The picture rail or frieze and the chair rail form what is known in the Victorian architectural style as a tripartite. The wall is effectively broken up into three separate areas. This type of wall treatment extends your options for decorating considerably.

Panel molding. Panel molding is used to break large surfaces up into panels. Panel molding is normally found on doors, but can also be used to decorate walls and ceilings. Fairly easy to install for the average do-it-yourself homeowner, panel molding can be used to create a custom look. Panels can be used in creative ways utilizing such features as size, curves, and decorative corners. Little details may be slipped inside to create an even more elegant look.

Tips to Guide the Use of Decorative Moldings

Your use may be determined by a number of factors including the architectural style of your home, as well as your personal taste in design styles. Be sure that the size and scale of the trim is appropriate for the room to which you will be adding this type of ornamentation. If you choose to paint your moldings, keep in mind that contrasting colors can add a more “dynamic” element to your room. You may consider coordinating moldings with each other as well as with other design elements present in the room.

Synthetic polymer, or polyurethane, is a natural choice for molding today. As it is lightweight, it is easy to cut and install. Polymer is a more economically feasible choice if you opt for more elaborate decorative moldings. Moldings are also flexible, allowing the homeowner to trim curves and rounded areas of the home. When utilizing cornice and crown moldings, you can combine various types to create a more personal statement. However, this can be more challenging to install for the individual. Corner blocks are available as well in polymer. These can be useful in eliminating difficult corner cuts.

Now you are aware of many further options. Don’t be intimidated. Installation instructions and informative articles like this one abound on the internet. Do your homework and investigate all of your available options. This is something that you will have to live with, so it should reflect your tastes. They will certainly set the decorative tone of any home. Good luck to you as you begin to use decorative moldings to create your wonderful space.

Flexible Baseboards

Flexible BaseboardsAn introduction to the decorative trim in your home

decorative moldings includes all types of seats used in a home. It can serve a purely decorative or can also be used to hide the rough edges of a wall. wood moldings can be more frequent in pine or oak polyurethane, or as commonly used today. Polyurethane is a lightweight, durable and sustainable wood. Molding can be painted or stained.

This article gives a brief description of the types of decorative elements availableand information available to guide you through the use of decorative frames in your home.

5 types of molding

There are five common types of decorative moldings. These include: baseboards, picture frames, moldings, walls and panels. Check out each one separately.

Bases. base molding is used to terminate the well wall on the floor. Mopboard also known, protects the base plate to the wall. Ideally, the base plate around its fulldoors and windows. A motherboard is widespread in all parts of most houses.

Ledge. The frame is the decorative molding on the top of the wall. Frame can be constructed using many suitable pieces. Frame is a more ornate moldings. The ornamentation includes acanthus leaves, egg and dart, brackets, dentil and many others.

Corona. projection is also used at the top of the wall. also called bed molding, which are installed in a cornerTo have more space. projection is also used for finishing furniture, cabinets, and fireplaces. Cove molding, a curved piece of the slab at the junction of the wall to the ceiling, offers another way to transition between the wall and ceiling.

Both moldings and cornices have been up to when the use of ceiling plaster was. crown molding and generally reflects the type or intended use of the room. For example, reception halls are often decoratedmore ornate cornices, cornice, while simple is often installed in functional areas such as home cooking.

wall molding. This group includes the walls, the walls and less frequent and friezes. frames are popular and can be found in many homes. The frame is about 30 "-36" above the ground, at the height of a chair back. If you click below the wall panel, this dish is known asslot cover.

chair rails and strips are often confused when in fact they are two separate entities, although the difference is small. A chair rail has a rounded top edge protruding from the wall, where the hooks are often located. Its main objective is to hang pictures. A frieze on the other hand, is a low profile, often decorated with engravings and a classic profile.

The frieze or chair rail and picture rail form what is known in Victoriaand tripartite architecture. The wall is divided into three zones. This type of wall treatment is significantly extends their decorating options.

Casting Group. panel molding is used to divide large areas of the panels. doors are usually printed, but can also be used to decorate the walls and ceilings. Fairly easy to install for the home DIY media, panel molding can be used to create a custom design. The panels can be used inusing creative ways to characteristics such as size, decorative curves and angles. Small details slips inside to create a more elegant.

Tips to guide the use of decorative frames

Their use can be determined by a number of factors, including the architectural style of your home and personal tastes in design styles. Make sure the size and scale of the bases is appropriate for the Council, to which you add this type of ornament. Ifchoose to paint the trim, please note that in contrast colors can add a more "dynamic" elements in your room. You may want to consider the coordination between their moldings and other design elements in the room.

synthetic polymers or polyurethane, is a natural choice for the molding of today. How is light, easy to cut and install. Polymer is a more workable solution if you opt for more elaborate decorative moldings. Mouldings are also flexible,enabling the owner to cut the curves and rounded surfaces of the house. Using frames and the crown, you can combine different types to create a more personal motivation. However, this can be more difficult to install for the individual. corner blocks are also available in the polymer. These can be useful for eliminating the difficult angle cuts.

Now I realize many other options. Do not be intimidated. Installation instructions and informative articles like thisabound on the Internet. Do your homework and explore all available options. It is a living being, so it should reflect your taste. Definitely will give your house all decorated. Good luck to you as you start to use decorative moldings to create your wonderful space.

Flexible Baseboards